ClearPathCompliance India +91 92521 92607Get a quote

Home / Blog / Guide

Research · Microplastics · Quality

Microplastics in Bottled Water: What WHO and International Research Actually Say, and What Plant Owners Should Do

Particles have been found, but harm has not been proven. What the studies show, where the evidence stops, and what to control at your plant.

Researcher in a lab coat looking through a microscope
Photo: Chidera Faustina Okeke / Unsplash

"Is there plastic in my bottled water?" If you run a packaged drinking water plant, you have probably heard some version of this question from a distributor, a buyer or a relative at a family function. Headlines with huge numbers do not make it easier to answer.

So we went back to the original research: the World Health Organization (WHO), and peer-reviewed studies from the US and Europe. This article explains, in plain language, what the science has found, where it stops, and what a sensible plant owner in India can do about it. No panic, and no brushing it aside either.

Yes, plastic particles have been found in bottled water

Several independent studies have detected micro- and nanoplastics in bottled water. The numbers vary a lot, mostly because each lab uses different methods and counts particles of different sizes.

StudyWhat was testedMain finding
Mason et al., State University of New York at Fredonia (Frontiers in Chemistry, 2018)259 bottles, 11 brands, 9 countriesSigns of microplastics in 93% of bottles; about 10.4 particles/L above 100 µm, about 325/L including smaller particles
Schymanski et al., Germany (Water Research, 2018)Mineral water in different packsReturnable PET: about 118 particles/L; single-use PET: about 14/L
Qian et al., Columbia University (PNAS, January 2024)3 US bottled water brands, new laser imaging methodAbout 2.4 lakh particles per litre, roughly 90% of them nanoplastics (below 1 µm)
Gálvez-Blanca et al., Spain (Scientific Reports, May 2024)5 top-selling Spanish brands, 1.5 L PETAbout 1.61 µg/L by mass; estimated adult intake 4–18 ng per kg body weight per day, which the authors called probably a negligible risk
University of Nebraska–Lincoln (Water Research, 2026)8 US brands under 60 °C heat, shaking, temperature cyclingHeat plus shaking raised nanoparticle levels about 9.3 times

One point matters more than any single number: finding particles is not the same as proving harm. The US National Institutes of Health, which part-funded the Columbia study, noted in its summary that the health effects of these particles are still not known.

Bottles, caps and heat matter more than the source

A pattern runs through these studies. Much of the plastic seems to come from the packaging and handling, not just from the water source.

  • Mason's team found polypropylene often, the same material used in many caps.
  • In Germany, returnable PET bottles, which get worn with repeated use, had the highest counts.
  • A 2019 University of Milan study (Winkler et al., Water Research) found that opening and closing the cap again and again released more particles at the neck and cap. Squeezing the bottle did not make a significant difference in their tests.
  • The 2026 Nebraska study found that heat and rough handling, like a pack left in a hot car, increased particle release from both the bottle body and the cap.

This is useful news for a plant owner. Caps, neck finish and storage are things you can actually control.

What WHO said, and what it did not say

WHO's August 2019 report, Microplastics in drinking-water, is still the main reference for water suppliers. In short:

  • Microplastics have been found in both tap and bottled water, but the data were limited and methods were not consistent.
  • Based on limited evidence, chemicals and biofilms linked to microplastics in drinking water were judged a low concern.
  • For the particles themselves, especially nano-sized ones, there was not enough information for firm conclusions, and no reliable information then suggesting a health concern at drinking water levels.
  • Routine monitoring of microplastics in drinking water was not recommended at that time.
  • Suppliers should keep focusing on microbial pathogens and chemicals known to cause harm. Good treatment that removes microbes also removes most particles.

WHO's 2022 review of nano- and microplastic exposure again pointed to data gaps. It did not change the priority: germs remain the biggest everyday risk in drinking water.

The Indian picture

India has started to act on this topic too. In August 2024, FSSAI launched a research project with Indian institutions to develop methods to detect microplastics in food and to measure how much people are exposed. There is no FSSAI or BIS limit for microplastics in packaged drinking water today. Separately, the Madras High Court has ordered a micro/nano plastics warning on water in plastic bottles; we explain that case in our microplastics label update.

What this means for water plant owners

  1. Keep microbial safety first. Source protection, disinfection, hygiene zones and the monthly testing under the FSSAI Scheme of Testing remain your biggest job.
  2. Treat packaging as a quality point. Approve your PET preform and cap suppliers, check cap torque and neck finish, and keep their certificates on file.
  3. Control heat. Store finished goods in cool, shaded warehouses and avoid long hours in hot trucks.
  4. Talk honestly. Do not claim "microplastic-free", and do not quote a research figure as an Indian limit. Say what you control and how.
  5. Do not start testing just to look good. WHO did not recommend routine monitoring. Add it only if a buyer specifies it.

Quick answers

Does research prove bottled water is unsafe? No. Studies detect particles. WHO did not find a demonstrated health risk at the levels assessed, but it flagged gaps, especially for nanoplastics.

Is 2.4 lakh particles per litre a safety limit? No. It is a research measurement using a new method, not a regulatory limit.

Must my plant test for microplastics? There is no such requirement in India today. Follow FSSAI's testing scheme and any buyer specification.

How ClearPath Compliance India can help

We help packaged drinking water plants with FSSAI licensing, the testing calendar, CGWA NOC, pollution board consent, Legal Metrology and Plastic EPR. If quality questions are pushing you to tighten your systems, we can map your approvals and a simple compliance calendar so hygiene and paperwork move together. Start with our water plant approval checklist or contact us.

References

  1. WHO, Microplastics in drinking-water (2019)
  2. WHO, Dietary and inhalation exposure to nano- and microplastic particles (2022)
  3. Mason et al., Frontiers in Chemistry (2018)
  4. Schymanski et al., Water Research (2018)
  5. Winkler et al., Water Research (2019)
  6. Qian et al., PNAS (2024); NIH Research Matters (23 Jan 2024)
  7. Gálvez-Blanca et al., Scientific Reports (2024)
  8. University of Nebraska–Lincoln, Water Research 295 (2026)
  9. Business Standard, FSSAI launches project on microplastics in food (18 Aug 2024)

General information only, not medical or legal advice. Research findings are summarised as published on the dates stated; methods and figures differ between studies and are not regulatory limits. No brand is named or assessed in this article. Rules are as notified on the dates stated; check fssai.gov.in for current requirements.

Free industry updates

Get the latest news for water and food plants

New FSSAI, BIS and pollution board rules, licence deadlines and market news for packaged drinking water, food and beverage plants, in plain language. Only when something important changes. No spam.

Unsubscribe anytime. Your email is never shared.